Choose Language: SvenskaEnglishChinese

News

September 15, 2017

NEW HEATEX SELECT

Heatex Select 513.1 is now available for download on our homepage.

June 26, 2017

NEW HEATEX SELECT

Heatex Select 513.0 is now available for download on our homepage.

  • Energy class for Model Q2 and Model V.
  • Additional Plates distances:
    • H20600/2.2/E
    • H20750/2.1/E
    • H20850/2.1/E
    • H20850/2.2/E
    • H21000/2.7/E
    • H21200/2.7/E
    • H21200/2.8/E
    • H22000/4.3/E
    • H22000/4.8/E
    • H22250/5.5/E

    Attention: The complete range of additional channel distances will be ready for order at the end of August 2017 (All Eurovent Certified).

June 23, 2017

Let us optimize your H2 for 2018 and beyond.

h2 

From the 1st of January 2018 the demands on minimum thermal efficiency of heat recovery systems in Non residential Ventilation units rise from 67% to 73%.

In 2018 allowed pressure drop also decreases through the decreased SFP-Value (internal specific fan power of ventilation components)

These limitations makes it important to hit the 73% while utilizing the allowed pressure drop in order to cover the largest possible air flow.

Customizable production technology and advanced thermodynamic algorithms make H2 stand out compared to other plate heat exchangers on the market. H2 is able to steplessly adjust the plate distance and utilize its full potential.

An assortment of more narrow plate distance steps in the performance area of 73%/ 200 Pa will make it easier to fulfill the Eco-Design requirements for 2018.
Attention: The complete range of additional channel distances will be ready for order at the end of August 2017 (All Eurovent Certified).
February 27,2017

NEW HEATEX SELECT

Heatex Select 512.0 is now available for download on our homepage.

Main updates:

  • The new EN – Rotor.
  • Our additional well height of 2.2 mm. (E-Rotor)
  • Hygromix which is a combination of Silica Gel and Molecular Sieve. (Mainly for the China Market)
  • Energy class for rotors and plate heat exchangers
  • Efficiency dry for plate heat exchangers
  • Showing effectiveness in performance
  • Model B is discontinued and not available for calculation

Several bugs have been successfully fixed.

February 24, 2017

NEW MODEL EN

We have now released our new Model EN which is based on the same high efficiency matrix used in our bigger E-Rotor.
Its designed to be fitted directly inside an air handling unit or mounted in a cassette, mainly for residential ventilation applications.

October 19, 2016

NEW HEATEX SELECT

Heatex Select 511.0 is now available for download via our homepage. Several bugs have been successfully fixed.

 

April 7, 2016

E_O_Lot6 

MORE OPTIONS FOR MODEL E!

Model E is now available with silica gel and molecular sieve coated aluminum matrix for enhanced moisture transfer. We have improved the performance of our adsorption wheels greatly. The humidity and temperature efficiencies have increased at comparable pressure drops.

Click here to see performance charts.

Model E complies with Ecodesign Lot 6, both for the 2016 and 2018 requirements. Model E is available without casing and is then called Model O.

More information about Model E.

MODEL E AND O IN CHINA

We are also happy to announce that Model E & O have now been released in China. Both models will be manufactured in our facility in Shanghai. This provides for shorter lead times and lower freight costs on the Asian market. Please contact your Heatex representative for more information regarding available models and options.

NEW HEATEX SELECT

Due to the release of the new options for Model E we have updated our calculation software. The latest version (Heatex Select 510.0) is always available on our website.

Laptop_HS 

September 23, 2015

HEATEX IS NOW AVAILABLE WITHIN CCSI VISUAL AHU

We are very excited to inform you that we are now one of the preferred suppliers in CCSI.

The CCSI Visual AHU software is a Windows based sales and production system, specially designed for air handling unit manufacturers. The unique 3D visualization software allows for the creation and rapid selection of user created components through customizable databases. There are several versions of the Visual AHU software available. The software can be installed onto a PC, be run online and be fully customized to the customer's requirements.

CCSI 

The software is developed by CCSI Limited. Established in 1988 CCSI Limited is now one of the leading HVAC Software developers in the world, specializing in developing and providing computer aided drafting, design and manufacturing systems.

All our products, including the new Model E, are listed in the software. To receive access to our product range you need to contact CCSI to activate Heatex products for your individual log in. The activation is free of charge.

For more information about the software or how to contact CCSI, go to www.ccsi.ie.

June 26, 2015

HEATEX SELECT 507.0

Due to the release of Model E and Model O we have updated our calculation software. The latest version is always available on our website.

Heatex Select is accessible in three ways:

1. Heatex Select Online version. You access it here through your personal log in.
2. The downloadable version is available here.
3. For latest DLL´s, please contact Heatex sales support or your sales representative.

September 17, 2015

NEW REGIONAL SALES MANAGER

Martin Warenholt & Daghan Inal

Martin Warenholt, Global Sales Director and Daghan Inal.

We would like to present our new colleague, Daghan Inal. Daghan is our Regional sales manager in Turkey, Middle East, North Africa & GCC. He is based in Istanbul and has many years of experience of the HVAC business.

Daghan joined us on 15 September and we are gladly welcoming him to our team.

June 26, 2015

HEATEX SELECT 507.0

Due to the release of Model E and Model O we have updated our calculation software. The latest version is always available on our website.

Heatex Select is accessible in three ways:

1. Heatex Select Online version. You access it here through your personal log in.
2. The downloadable version is available here.
3. For latest DLL´s, please contact Heatex sales support or your sales representative.

June 18, 2015

New Model E

Model E IS HERE!

The Next Generation Rotary Heat Exchanger

Model E is our latest product. A unique rotary air-to-air heat exchanger designed for air handling units, primarily for comfort ventilation applications. Like all rotary heat exchangers Model E offers the benefits of the low freezing risk, small footprints and high efficiency. However, Model E takes the advantages even further.

Model E has the most compact casing available on the market. This gives an exceptional efficiency compared to conventional rotor exchangers with the same casing dimensions and reduces the shadow in the AHU to a minimum.

To get the best performance possible and to make it more durable we developed a matrix with a completely new geometry. Model E offers a new sealing solution, which reduces leakage significantly compared to sealing systems in conventional rotary heat exchangers.

Model E already complies with the Ecodesign Lot 6 requirements, both for 2016 and 2018.

Model E is also available without casing and is then called Model O.

More information about Model E.

April 14, 2015

Model E

April 7, 2015

HEATEX SELECT 505.0

We have released a new version of Heatex Select due to Eurovent regulations. The new regulations, which come into effect 1 April 2015, require values for EATR (carry over) and OACF (leakage) to be included on printouts for rotating heat exchangers in casings.

Heatex Select is accessible in three ways:

1. Heatex Select Online version. You access it here through your personal log in.
2. The downloadable version is available here.
3. For latest DLL´s, please contact your sales representative. (The DLL is not affected by the Heatex Select 505.0 update.)

heatex select image

NEW SALES MANAGER

At ISH we introduced our new National Sales Manager. Paul Rigby is based in Leeds and will be responsible for the UK and Ireland market. Paul has a background from HVAC and has previously worked at an air handling unit manufacturer. We are looking forward to start working with Paul and are gladly welcoming him to the Heatex team.

ISH_Paul and Aleksandra

Paul Rigby and Aleksandra Kruszewska at ISH.

HEATEX SELECT DLL

We have released a new DLL of Heatex Select 504.0. To receive the latest version, please contact your sales representative.

HEATEX SELECT 504.0

We have now released new version of Heatex Select, which is available both online and offline.

In the 504.0 version we have made the following improvements:

  • Now it is possible to see energy classification for H2.
  • Both dry and wet efficiencies for H2 are visible in online and offline versions.

Heatex Select is accessible in three ways:

1. Heatex Select Online version. You access it here through your personal log in.
2. The downloadable version (for those without good internet connection) is available here.
3. For latest DLL´s, please contact your sales representative.

NEW H2 SIZES

Following the request from our customers, we have introduced new sizes for our H2 model. Now it is possible to calculate model H2 in 700 and 1400 size.
Please download the latest version of Heatex Select or contact us to learn more.

ERIC TAN

Our new Area Sales Manager for Asia Pacific, Eric Tan, has officially begun and is currently visiting Heatex headquarters in Malmö, Sweden.

Here together with our Global Sales Director, Martin Warenholt.

Eric is based in Singapore.

HEATEX SELECT 502.0

heatex select image

The Eurovent organization approved our latest update on Heatex Select, so now it is officially released. The news is that we have one version and we make this version available on two plattforms: online and offline

We have slightly changed the version terminology so we call this version now 502.0, where the last digit indicates variations of the same version. With the same version we mean when we change the software but that change does not affect the calculated performance as such. It could be some minor bug fixes or graphical improvements or added warnings. Right now we are at base level (zero) as we just have released this version. In the future, when you find 502.1, you know you will have the same calculation performance but in an improved software environment.

The biggest news of this 502 version is the addition of our plate heat exchanger H2 to the offline version.

HEATEX FIRST NEWSLETTER

We produced and sent out Heatex first newsletter to many of our customers. If you have not seen it you can click on this link:

http://us8.campaign-archive1.com/?u=f3e40f52295cbcfb02a695c95&id=7eff8df2b2&e=[UNIQID]

The plan is to send out a new newsletter every quarter.

HEATEX HEADQUARTERS

Our headquarters are in Malmö.

The visiting address is Bronsyxegatan 13, Malmö.

Our facilities are located in the industrial area called Fosieby on the southern side, in between the two circular roads (the inner and outer roundabout - inre och yttre ringvägen) around town. 

SOCIAL MEDIA

Follow Heatex AB also on LinkedIn.

TELEPHONE

Heatex in Sweden will maintain its switchboard telephone number (+46 410 710 500) even when relocated to Malmö.

HEATEX' NEW WORKING CLOTHS

The redesign of the brand has now effect on our new working cloths. Not only are they now branded with the new logotype, colors have changed as well. Here an example (the shirt). More will follow.

HEATEX SELECT - ALWAYS UPDATED

heatex select image

THE PROMISE: we continuously update and improve.
THE PROOF: With Heatex Select Web (our online version) you always automatically use the most updated version.

We also have Heatex Select Download. The lastest version 4.9.5. is available.

NEW WEBSITE

Welcome to Heatex' website. This site went live on September 24th, 2013. It marks the start of our new corporate identity with a new brand, new colors, new look and feel.

For inquiries regarding this site, the Heatex brand and related issues, please contact Heatex Marketing Department.