Choose Language: SvenskaEnglishChinese

Model P - Cross flow heat exchangers

Product Info

Model P

Pressure resistant cross flow exchanger

The Heatex Model P exchanger is designed with the same plate configuration as the success exchanger Heatex Model H, and allows the same high heat transfer coefficient.

The special characteristic of Model P is the strengthened construction allowing extreme pressure differences. The extra strong aluminum plates contribute to a long expected life time and low operational and total costs. Optimal thermal design can be achieved through a wide choice of plate distances, options and materials.  

A single pass exchanger can provide a sensible efficiency of 65 - 70%.

Heatex cross flow plate heat exchangers comply with hygiene standard EN 13779 and clean room standard DIN 1946 part 4.

Options for Heatex plate heat exchangers.

Technical Data

MAXIMUM ALLOWED DIFFERENTIAL PRESSURE:
3800 Pa / 15 inch wc. Influence on pressure drop is described in the technical documentation.

MAXIMUM LEAKAGE:
0.1% of nominal air flow (with silicone sealant 1%).

MAXIMUM ALLOWED TEMPERATURE:
90°C / 190°F (200°C / 390°F with silicone sealant).

PLATE MATERIAL:
Aluminum is standard. Epoxy coated aluminum available for improved corrosion protection.

FRAME MATERIAL:
Corner profiles in aluminum and gables in aluzinc.  

SEALING:
Silicone free (max 90°C / 190°F)
Silicone (max 200°C / 390°F)