Choose Language: SvenskaEnglishChinese

Model T - Cross flow heat exchangers

Product Info

Model T

Twin cross flow exchanger

The Heatex Model T plate heat exchanger is made out of two identical plate heat exchangers embedded in a single casing.

The special plate design combined with the increased efficiency of a two-step arrangement, along with the benefit of a compact casing, makes Model T a preferable choice for many applications.  

The wide range of sizes and configurations enables this model to cover any requirement, from small decentralized residential applications up to medium and larger centralized ventilation applications.  

The double pass exchanger provides approximately a 10% better sensible efficiency than an identical single pass unit. Model T allows dry temperature efficiencies up to 80% and wet efficiencies exceeding 90%.

Heatex cross flow plate heat exchangers comply with hygiene standard EN 13779 and clean room standard DIN 1946 part 4.

Options for Heatex plate heat exchangers.

Technical Data

MAXIMUM ALLOWED DIFFERENTIAL PRESSURE:
700 Pa / 2.8 inch wc

MAXIMUM LEAKAGE:
1% of nominal air flow

MAXIMUM ALLOWED TEMPERATURE:
90°C / 190°F (200°C / 390°F with silicone sealant).

PLATE MATERIAL:
Aluminum is standard. Epoxy coated aluminum available for improved corrosion protection.

FRAME MATERIAL:
Corner profiles and gables in aluminum.

SEALING:
Silicone free (max 90°C / 190°F)
Silicone (max 200°C / 390°F)